1994 KTM 400 LC4 620 LC4 Motorcycle Owners Handbook

Description

This 1994 KTM 400 LC4 620 LC4 Owners Handbook is an authorized reproduction of the original owners manual.

Table of Contents

INTRODUCTION

OPERATION INSTRUMENTS

Frame number

Engine number

Clutch control lever

Decompression lever

Choke lever

Hand brake lever, adjusting the pressure point

Speedometer, control lamps (EGS]

Ignition lock

Combination switch (EGS)

Combination switch (EXC)

Short circuit switch (EGS)

Filler cap

Fuel tap

Warm start device

Shift lever

Kick starter

Foot brake pedal

Main stand

Tool set (EGS)

Handlebar lock

PRE-OPERATION INSTRUCTIONS

DRIVING INSTRUCTIONS

MAINTENANCE WORK ON CHASSIS AND ENGINE

Determining and adjusting the rear ride height sag

Determining the static sag and the correct shock spring

Changing the shock spring

Checking and adjusting the front fork static sag of White Power fork

How to determine whether your front fork spring is adjusted correctly

Altering the spring preload, replacing the fork springs, changing the fork oil, changing the length of the air chamber

Compression and rebound of fork and shock absorber

Adjusting compression and rebound

Adjustment guidelines – Shock absorber

Adjustment guidelines – Fork

Adjustment guidelines for special riding conditions

Projection of the forks

Standard adjustment data – Shock absorber, fork

Check and adjust steering head bearing

Servicing the rear suspension linkage

Chain tension, chain maintenance

Disc brakes – In general

Checking of brake fluid level – front brake

Check the front brake pads

Replace brake pads – front brake

Bleed the front brake

Check the level of brake fluid at the rear

Checking the rear brake pads

Replacing the rear brake pads

Bleeding the rear brake

Dismounting and mounting the front wheel

Dismounting and mounting the rear wheel

Checking the shock absorber rubbers on the rear wheel hub

Cooling system

Coolant level check

Cleaning the air filter

Exhaust system

Fuel system

Carburetor – Adjust idling

Adjust warm start device

Check float level

Adjusting the throttle cable

Adjusting the choke cable

Adjusting the clutch cable

Checking of clutch disengagement position

Adjustment of clutch disengagement

Check the setting of the decompression cable

Oil flow

Checking engine oil level

Engine oil change

Changing oil filter

Replacing the microfilter

Adjust valve play

Check and adjust ignition point

TECHNICAL SPECIFICATIONS – CHASSIS

LUBRICATION- AND MAINTENANCE-SCHEDULE

WIRING DIAGRAMME

Includes translations in German, English, Italian, French and Spanish.Try searching the following related categories for more products.