2001 KTM 400 640 LC4-E and 640 LC4-E Supermoto Motorcycle Owners Handbook

Description

This 2001 KTM 400 640 LC4-E and 640 LC4-E Supermoto Owners Handbook is an authorized reproduction of the original, out of print manual. It will familiarize you with how to operate, service and maintain your 2001 KTM 400/640 LC4-E Supermoto motorcycle.

Table of Contents:

SERIAL NUMBER LOCATIONS
Chassis number, Engine number, engine type

OPERATION INSTRUMENTS
Clutch lever, Hand decompression lever, Choke lever, Hand brake lever, Speedometer, indicator lamps, Ignition lock, Combination switch Starter tip switch, emergency OFF switch, Filler cap, Fuel, Fuel tap, Shift lever, Kickstarter, Foot brake pedal, Compression damping of fork, Rebound damping of fork, Compression damping of shock absorber, Rebound damping of shock absorber, Baggage carrier

DRIVING INSTRUCTIONS

PERIODIC MAINTENANCE-SCHEDULE

MAINTENANCE WORK ON CHASSIS AND ENGINE
Tool set, Removing the seat, Checking and adjusting steering head bearing, Changing the spring preload of the shock absorber, Lubricate shock absorber linkage, Checking rubber ring on the rear shock absorber, Checking chain tension, Correct chain tension, Chain maintenance, Chain wear, General information on KTM disc brakes, Adjusting of free travel at the hand brake lever, Checking of brake fluid level – front brake, Refilling the front brake fluid reservoir, Checking the front brake pads, Changing the basic position of the foot brake pedal, Check the rear brake fluid level, Refilling the rear brake fluid reservoir, Checking the rear brake pads, Dismounting and mounting the front wheel, Dismounting and mounting the rear wheel, Checking the shock absorption rubbers in the rear hub, Tires, air pressure, Checking spoke tension, Battery, Charging the battery, Main fuse, Fuses for individual power-consuming units, Exchanging the headlight lamp, Replacing the parking light bulb, Exchanging the brake light and tail light bulb, Cooling system, Checking the cooling liquid level, Adjusting idling speed, Adjusting the throttle cable, Draining the carburetor float chamber, Adjusting the choke cable, Adjusting the clutch cable, Checking the adjustment of the hand decompression cable, Engine oil, Checking the engine oil level, Oil circuit, Oil and fine screen filter change, bleeding of the oil system, Changing oil filter

TROUBLE SHOOTING

CLEANING

CONSERVATION FOR WINTER OPERATION

STORAGE
Re-initation after time of storage

TECHNICAL SPECIFICATIONS – CHASSIS

TECHNICAL SPECIFICATIONS – ENGINE

CONSUMER INFORMATION FOR USA ONLY

WIRING DIAGRAM