Description
This 104 page, 2010 KTM 125 150 250 SX Owners Manual is an authorized reproduction of the original, out of print manual. It provides repair and maintenance information for 2010 KTM 125 150 250 SX motorcycles. This 2010 KTM 125 150 250 SX Owners Manual should be used in conjunction with your KTM service manual specific for your 2010 KTM motorcycle.
This manual includes the following topics:
SERIAL NUMBER LOCATIONS
Chassis number
Engine number, engine type
OPERATION INSTRUMENTS
Clutch lever
Hand brake lever
Short circuit button
Filler cap
Fuel tap
Choke Knob
Shift lever
Kickstarter
Compression damping of fork
Rebound damping of fork
Compassion damping of stock absorber
Rebound damping of shock absorber
GENERAL TIPS AND WARNINGS FOR STARTING THE
MOTORCYCLE
Instructions for your first ride
Running in
DRIVING INSTRUCTIONS
What you should check before each start
Starting when the engine is cold
Starting when the engine is warm
What to do when the engine is flooded
Starting off
Shifting/Riding
Braking
Stopping and pacing
Refueling, fuel
PERIODIC MAINTENANCE SCHEDULE
MAINTENANCE WORK ON CHASSIS AND ENGINE
Changing the spring preloading of the shock absorber
Pivot bearing
Basic suspension setup for the weight of the driver
Checking the shock absorber and spring
Determining the static sag of the shock absorber
Determining the riding sag of the shock absorber
Checking the basic setup of the telescopic fork
Changing the spring preload on the telescopic fork
Replacing fork springs
Breather plug front fork
Cleaning the dust sleeves of the telescopic fork
Changing the fork offset (caster)
Checking and adjusting the steering head bearing
How to change the handlebar position
Check chain tension
Adapting the chain guide
Correct chain tension
Chain maintenance
Chain wear
General information about KTM disc brakes
Adjusting the free travel at the hand brake lever
Checking the brake fluid level – front brake
Refilling the front brake fluid reservoir
Checking the front brake pads
Replacing the front brake pads
Checking the rear brake fluid level
Refilling the rear brake fluid reservoir
Changing the basic position of the foot brake pedal
Checking the rear brake pads
Replacing the rear brake pads
Dismounting and mounting the front wheel
Dismounting and mounting the rear wheel
Tires, air pressure
Checking spoke tension
Cooling system
Checking the coolant level
Bleeding the cooling system
Cleaning the air filter
Exhaust system
Changing the original position of the clutch lever
Changing the oil level of hydraulic clutch (125/150)
Changing the oil level of hydraulic clutch (250)
Bleeding the hydraulic clutch
Carburetor adjustment
Draining the float chamber of the carburetor
Checking the float level
Adjusting the engine power via the ignition curve
Adjusting the engine power via the auxiliary spring
Check transmission oil level (125/150)
Changing the transmission oil (125/150)
Check transmission oil level (250)
Changing the transmission oil (250)
CLEANING
CONSERVATION FOR WINTER OPERATION & STORAGE
TECHNICAL SPECIFICATIONS – CHASSIS
TECHNICAL SPECIFICATIONS – ENGINE
Carburetor Table 125
Carburetor Table 150
Carburetor Table 250
WIRING DIAGRAM
INDEX