Allis Chalmers Model G Tractor Repair Service Manual

Description

This 44 page, Allis Chalmers Model G Tractor Repair Service Manual which provides detailed service information, step-by-step repair instruction and maintenance specifications for Allis Chalmers Model G tractors.

The engine for the model “G” tractor is mounted in the rear of the tractor. For purposes of identification the engine will be referred to as crank end, flywheel end, manifold side and generator side. The No. I cylinder will be at the crank end of the engine.

The design of the model “G” tractor lends itself to a variety of procedure for following practical repair work. The following general procedure may be followed in removing major assemblies from the complete machine.

The complete engine may be removed as a unit. The engine must be removed to do any repair work on the clutch, throwout bearing, flywheel or oil pump. The engine and clutch housing may be removed as a unit if the differential is to be removed or the transmission dismantled. Removal of the complete engine assembly or of the clutch housing must be made if the belt pulley drive gear or engine intermediate gears need servicing.

The adjustment of the transmission shaft bearings and removal of the special low reduction gear may be accomplished if the torque tube is removed from tractor. If the complete transmission and differential is to be repaired, the torque tube, the engine, clutch housing and the two wheel axle assemblies must be removed.

Index of Topics

Air cleaner
Ammeter

Battery
Belt pulley
Brakes
Brake pedal adjustment
Camshaft
Carburetor
Connecting rod
Clutch
Clutch housing
Clutch housing & engine removal
Clutch throwout bearing & fork
Crankshaft
Crankshaft oil seals cylinder head

Diagnosis of tractor problems
Differential
Distributor
Drawbar

Engine
Engine oiling system
Engine removal
Electrical system

Fan belt
Fan assembly
Flywheel & ring gear
Front axle & spindle
Front wheels
Fuel
Fuel filter
Fuel tank

Gear shift
Generator
Governor
Governor weight assembly

Hood and Hood support
Hydraulic pump

Ignition switch
Intermediate gears lights

Light switch
Low gear (special)

Manifold

Oil seals, front & rear
Oil pump
Oiling system
Oil pressure relief valve

Pistons & rings

Ring gear and Flywheel
Radiator
Reel wheel and axle housing

Specifications
Starter
Steering gear
Spark plugs
Special low gear

Timing gear cover
Timing engine
Transmission

Valves

Wiring diagram

This Allis Chalmers Model G Factory Service Manual is a high quality reproduction of the original out of print manual.