Ford 2000 3000 4000 5000 Operators Manual

Description

This 173 page, Ford 2000 3000 4000 5000 Operators Manuals is a reproduction of the original out of print manual. This manual has been prepared to assist you in the proper break-in, daily care, and operation of your Ford Tractor. It also contains specific information on the many built-in features of the tractor, the accessories and options that are available, general
specifications of the tractor, safety precautions, instructions for making minor adjustments, and your tractor service policy. It is important to follow regularly scheduled service periods as recommended in this manual. The information in this manual applies to the Ford 2000, 3000, 4000, and 5000 All Purpose Tractors, and to the Ford 2110 and 4110 LCG Tractors. Where differences exist, specific information is presented for each model. This manual also includes a supplement manual which covers 4000 and 5000 series Row Crop Tractors.

Covers the following models:

2000 Tractor (1968-1975) gas and diesel (3-Cylinder all purpose), 2100 Tractor (1968-1975) gas and diesel, 3-cylinder, 2110 Tractor (1968-1975) gas and diesel (3-cylinder Low Center of Gravity), 2120 Tractor (1968-1975) gas and diesel, 3-cylinder, 2150 Tractor (1971-1975) gas and diesel, 3-cylinder, 2300 Tractor (1968-1975) gas and diesel, 3-cylinder, 2310 Tractor (1968-1975) gas and diesel, 3-cylinder, 3000 Tractor (1968-1975) gas and diesel (3-Cylinder All Purpose), 3100 Tractor (1968-1975) gas and diesel, 3-cylinder, 3120 Tractor (1968-1975) gas and diesel, 3-cylinder, 3150 Tractor (1971-1974) gas and diesel, 3-cylinder, 3190 Tractor (1968-1975) gas and diesel, 3-cylinder, 3300 Tractor (1968-1975) gas and diesel, 3-cylinder, 3310 Tractor (1968-1975) gas and diesel, 3-cylinder, 4000 Tractor (1968-1975) gas and diesel (Special Utility – 3-Cylinder all purpose, row crop and flat deck), 4100 Tractor (1968-1974) gas and diesel, 3-cylinder, 4110 Tractor (1968-1975) gas and diesel (3-cylinder Low Center of Gravity), 4140 Tractor (1970-1974) gas and diesel, 3-cylinder, 4190 Tractor (1968-1974) gas and diesel, 3-cylinder, 4200 Tractor (1968-1975, SN# 42200042) gas and diesel (Row Crop), 4330 Tractor (1968-1974) gas and diesel, 3-cylinder, 4410 Tractor (1968-1974) gas and diesel, 3-cylinder, 5000 Tractor (1968-1975) gas and diesel (4-Cylinder, Cylinder Row Crop and Flat Deck), 5200 Tractor (1968-1975)

Table of Contents

CONTROLS AND INSTRUMENTS
Points out the various controls and instruments and gives a brief description of their use.

OPERATION
Deals with the proper method of fueling and the correct way to break-in your tractor. Describes how
to start, drive and operate, stop, and tow the tractor. Also details PTO operation, hydraulic system operation, attaching rear equipment, wheel tread adjustments, and tractor weighting.

LUBRICATION AND MAINTENANCE
Specifies the items that require lubrication and maintenance, and the intervals that service should
be performed to obtain the maximum efficiency from your new Ford Tractor.

GENERAL MAINTENANCE
Gives procedures on the general maintenance and adjustments Details routine operations and checks
which should be made, and specifies the proper procedures for putting the tractor into storage.

SPECIFICATIONS
Lists the general specifications of the tractor, and recommended lubricants.

Index of Topics

Accessories
Air Circulation
Air Cleaner
Attaching Equipment
Automatic Thermostart
Auxiliary Service Control Valve
Auxiliary Transmission
Battery
Belt Pulley
Bleeding the Diesel Fuel System
Brake Adjustment
Brake Pedals
Break-In Procedures
Carburetor Adjustments
Category I and II Linkage
Check Chains
Choke Control
Clutch Pedal
Cold Weather Starting
Controls and Instruments
Coolant Immersion Heater
Cooling System
Diesel Engine Speed Adjustments
Diesel Fuel System
Distributor
Draft Control
Driving the Tractor
Drawbar
Electrical System
Engine
Engine Oil Pressure Warning Light
Engine Oil Recommendations
Ether Spray Primer
Excess Fuel Button
Fan Belt
Flexible Link Ends
Flow Control Knob
Foot Throttle
Front Wheel Bearings
Front Wheel Toe-In
Fuel
Fuel Filters
Fuel Gauge
Fuel Injection Pump
Fuel Injectors
Fuel Sediment Bowl
Fuel Tank Shut-off Valve
Gasoline Fuel System
Gearshift Levers
General Maintenance
Generator and Regulator
Generator Warning Light
Ground Speed Charts
Ground Speed PTO
Headlamps
Hydraulic Lift System Controls and Operation
Hydraulic Lift System Lubrication and Maintenance
Ignition System
In-Line Injection Pump
Instrument Lights
Key-Starter Switch
Leveling Crank
Lift Linkage and Drawbar
Light Switch
Live PTO
Liquid Ballast
Lubricant Storage
Lubrication and Maintenance
Lubrication Fittings
Manually Adjusted Rear Wheels
Oil Levels
Oil Pressure Warning Lights
Operation
Parking Brake Lock
Position Control
Power Adjusted Rear Wheels
Power Steering
Power Take-Off Operation
Pre-Cleaner Bowl
Pre-Starting Check
Proof-Meter
PTO Control Handle
PTO Shift Lever
PTO Speed Shift Lever
Radiator
Rear Axle and Hydraulic Lift System
Refueling the Tractor
Remote Control Valves
Safety Precautions
Seat
Sealed Beam Headlamps
Selector Lever Stops
Select-O-Speed Drive Line Disengagement Lever
Select-O-Speed Gear Selector Lever
Select-O-Speed Inching Pedal
Select-O-Speed Neutral Bypass Plate
Select-O-Speed Oil Pressure Warning Light
Select-O-Speed PTO Control Handle
Select-O-Speed PTO Speed Shift Lever
Select-O-Speed Transmission and PTO Controls
Select-O-Speed Transmission Operation
Service Daily or Every 10 Hours
Service Every 50 Hours
Service Every 300 Hours
Service Every 600 Hours
Service Every 1200 Hours
Service Every 2400 Hours
Seasonal Services
Shifting On-the-Go
Spark Plugs
Specifications
Speed Selector Mechanism
Stabilizers
Starting the Engine
Starting Motor
Steering Housing
Stop Control
Stopping the Engine
Stopping the Tractor
Storage
Swinging Drawbar
Taillight
Temperature Gauge
Thermostat
Throttle
Timing
Tire Pressures
Towing the Tractor
Transmission PTO
Upper Link
Valve Clearance
Warm Weather Starting
Warning Lights
Weighting Limitations
Wheel Bearings
Wheel Tread Adjustment
Wheel Weights