Used John Deere 610 Series Drawn Chisel Plow Operator Manual I1

Description

This Used John Deere 610 Series Drawn Chisel Plow Operator Manual provides you with everything you need to operate and service John Deere 610 Series Drawn Chisel Plows.
Issue I1
Copyright 1991

Contents
-Safety
-Preparing the Tractor
Preparing Hydraulic  System
Securing 3-point hitch
Positioning drawbar
-Preparing the Machine
Tire Pressures .
Checking wheel bolts and gearings
-Attaching and Detaching
Attaching hitch and hydraulic Hoses
Attaching Safety Chain
Checking depth and Control operation
Checking wing fold operation
Detaching
-Transporting
Raising Storage Stand
-Operating the Machine
Tightening Hardware
Adjusting Spring-Reset Standards
Operating guidelines
Preparing to operate machine in field
Balanced hydraulic Depth Control System (Parallel Series)
Adjusting Mechanical Depth Control
Single Point Depth Stop Control
Machine Leveling Procedure
Adjusting Horizontal Fold in Field
Leveling Wings-Rigid Horizontal Fold
Adjusting
Fold Cylinder Linkage
Wing Fold Operation
Replacing
Tools
Twisted Shovels
Adjusting
Stabilizer Wheels
Sweep Pitch Angle
-Lubrication md Maintenance
-Troubleshooting
Recommendations for  working hard soils
-Service
Using Safe Service Procedures
Metric Series Torque chart Chart
Inch Series Torque Chart
Checking Wheel Bolts and Bearings
Twisted Rockshaft check
Service Tires safely
Checking Tire Pressures
Preventing Contamination
Standard Spacing and Hose Routing
Rigid, Single Wheel-3.4 m (11 ft) and 5.2 m (17 ft)
Rigid, tandem Wheel-3.4 m (11 ft) and 5.2 m (17 ft)
Horizontal fold-5.8 m (19 ft) and 7.0 m (23 ft)
Horizontal or Over-Center fold-7 m (23ft) and 8.2 m (27 ft)
305 mm (12-in) Spacing-8.8 m (29 ft) & 10.7 m (35 ft)
406 mm (16-in.) Spacing, Spring-trip Standards
406 mm (16-in) Spacing Rigid Standards
305 mm (12-in) Spacing 11.3 m (37 ft) & 12.5 m (41 ft)
406 mm (16-in.) Spacing, spring-trip Standards
406 mm (16-in.)Spacing Rigid Standards
Installing Tools
Installing and Bleeding Wing Fold Cylinders
Bleeding Depth Control Cylinders
Removing Hydraulic Cylinders
Checking For Depth Control Cylinder Leakage
-Storage
-Crime Prevention Tips
-Specifications
Rigid Models
Flexible Models
Serial Number

Replaces OM-N200098 J0